Netgear MS510TXPP User Manual - Page 26

Smart Managed Pro Switches MS510TX and MS510TXPP View and Configure the Switch Management Settings This section describes how to display the switch status and specify some basic switch information, such as the management interface IP address, system clock settings, and DNS information. From the System > Management menu, you can access pages that are described in the following sections: • View or Define System Information and View Software Versions on page 26 • View the System CPU Status on page 28 • View USB Device Information on page 29 • Configure the IPv4 Address for the Network Interface and Management VLAN on page 30 • Configure the IPv6 Address for the Network Interface on page 32 • View the IPv6 Network Neighbor on page 33 • Configure the Time Settings on page 34 • Configure DNS Settings on page 44 • Configure Green Ethernet Settings on page 47 View or Define System Information and View Software Versions When you log in, the System Information page displays. Use this page to configure and view general device information such as system name, location, and contact, general system temperature, temperatures of the fans, and boot and software versions. To view or define system information and view software versions: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the Switch on page 14. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. Configure System Information 26 User Manual