Netgear MS510TXPP User Manual - Page 206

Smart Managed Pro Switches MS510TX and MS510TXPP IPv6 ACL/DiffServ assignment is appropriate for LAG interfaces. The procedures described by an ACL or DiffServ policy are equally applicable on a LAG interface. Add and Configure an IPv6 DiffServ Class To add and configure an IPv6 DiffServ class: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the Switch on page 14. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select QoS > DiffServ > Advanced > IPv6 Class Configuration. The IPv6 Class Name a page displays. 6. In the Class Name field, enter a class name. The Class Name field also lists all the existing IPv6 DiffServ class names, from which one can be selected for modification or deletion. 7. From the Class Type menu, select the class type All. The switch supports only the class type value All, which means that all the various match criteria defined for the class are satisfied for a packet match. All signifies the logical AND statement of all the match criteria. 8. Click the Add button. The new class is added. 9. After creating the class, click the class name. Configure Quality of Service 206 User Manual