Netgear MS510TXPP User Manual - Page 100

Smart Managed Pro Switches MS510TX and MS510TXPP 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the Switch on page 14. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching > VLAN > Advanced > VLAN Membership. 6. In the VLAN ID menu, select the VLAN ID. 7. In the Group Operation menu, select one of the following options, which applies to all ports in the VLAN: • Tag All. For all ports that are members of the VLAN, all egress packets are tagged. • Untag All. For all ports that are members of the VLAN, tags are removed from all egress packets. • Remove All. All ports that were dynamically registered through GVRP are removed from the VLAN. 8. In the Ports table, click each port once, twice, or three times to configure one of the following modes or reset the port to the default settings: • T (Tagged). Select the ports on which all frames transmitted for this VLAN are tagged. The ports that are selected are included in the VLAN. • U (Untagged). Select the ports on which all frames transmitted for this VLAN are untagged. The ports that are selected are included in the VLAN. By default, the selection is blank, which means that the port is excluded from the VLAN but can be dynamically registered (autodetected) in the VLAN through GVRP. 9. In the LAG table, click each LAG once, twice, or three times to configure one of the following modes or reset the LAG to the default settings: Configure Switching 100 User Manual