Netgear MS510TXPP User Manual - Page 274

Smart Managed Pro Switches MS510TX and MS510TXPP The following table describes the information that is displayed in the MAC Binding Table. Table 62. MAC Binding Table Field Interface Direction ACL Type ACL ID Sequence Number Description The interface of the ACL assigned. The selected packet filtering direction for the ACL. The type of ACL assigned to the selected interface and direction. The ACL name identifying the ACL assigned to the selected interface and direction. The sequence number signifying the order of the specified ACL relative to other ACLs assigned to the selected interface and direction. Configure an IP ACL An IP or IPv6 ACL consists of a set of rules that are matched sequentially against a packet. When a packet meets the match criteria of a rule, the specified rule action (Permit or Deny) is taken, and the additional rules are not checked for a match. You must specify the interfaces to which an IP ACL applies, as well as whether it applies to inbound or outbound traffic. Use the IP ACL page to add or remove IP-based ACLs. Add an IP ACL To add an IP ACL: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the Switch on page 14. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Security > ACL > Advanced > IP ACL. The IP ACL Table page displays. 6. In the IP ACL ID field, specify the ACL ID, which depends on the IP ACL type. The IP ACL ID is an integer in the following range: Manage Device Security 274 User Manual