LiftMaster JHDC Installation Manual - English French Spanish - Page 12
Install the Chain
View all LiftMaster JHDC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
TDC Trolley Assembly (continued) Install the Chain The chain is packed separately from the operator. Please ensure you have your chain before starting installation. 1. Position the trolley 2 inches (5.1 cm) away from the front idler. 2. Attach the chain to the trolley threaded shaft using the master link. 3. Run the chain along the track to the operator. Wrap the chain around the operator drive sprocket. 4. Run the chain along the track to the front idler. Wrap the chain around the front idler. 5. Attach the chain to the front of the trolley using the master link. 6. Tighten the chain until the chain sags about 3 inches (7.6 cm) at the mid point of the track. 7. For retrofit trolley installations, use an additional 6" of chain for the installation. 2˝ 3˝ 12