LiftMaster HDSL24UL Installation Manual - English - Page 7

Operator Specifications, External Entrapment Protection Device Inputs non-contact

Get LiftMaster HDSL24UL PDF manuals and user guides View all LiftMaster HDSL24UL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

INTRODUCTION Operator Specifications Usage Classification Class I, II, III, and IV Main AC Supply 120 Vac, 4 Amps (10 Amps including Accessory Outlets) OR 240 Vac, 2 Amps When Optional Transformer Kit Model 3PHCONV is installed in the field, operator is rated 208/240/480/575 VAC, 5.2/4.5/2.3/1.9 A, 60 Hz, 1 PH System Operating Voltage 24 Vdc Transformer Run / Battery Backup Accessory Power 24 Vdc, 1A max. for ON + SW (switched) Solar Power Max 24 Vdc at 60 watts max. Maximum Gate Weight 3,000 lbs. (1,360 kg) Minimum Gate Travel Distance 4 feet (1.2 m) Maximum Gate Travel Distance 75 feet (22.86 m) Maximum Gate Travel Speed 1 ft./sec. Maximum Daily Cycle Rate Continuous for line voltage, not continuous for solar Maximum Duty Cycle Continuous Operating Temperature Without Heater: -20°C to 60°C (-4°F to 140°F) With Optional Heater: -40°C to 60°C (-40°F to 140°F) 120VAC accessory power outlets 6 amps When the 3PHCONV kit is used, the outlets are only rated 1 Amp External Entrapment Protection Device Inputs (non-contact Main board - up to 2 close entrapment protection devices and 1 open entrapment and/or contact) protection device. Expansion board - up to 3 entrapment protection devices configurable to either the close or open direction and up to 8 edge sensors when using the wireless edge sensor kit model LMWEKITU and LMWETXU. 16.77 [42.6 cm] 25.1" (50.8 cm) 17.51" (44.5 cm) 10.31" (26.2 cm) 10.4" (26.4 cm) 2.52" (6.4 cm) 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
7
Operator Specifications
Usage Classification
Class I, II, III, and IV
Main AC Supply
120 Vac, 4 Amps (10 Amps including Accessory Outlets)
OR
240 Vac, 2 Amps
When Optional Transformer Kit Model 3PHCONV is installed in the field, operator is rated
208/240/480/575 VAC, 5.2/4.5/2.3/1.9 A, 60 Hz, 1 PH
System Operating Voltage
24 Vdc Transformer Run / Battery Backup
Accessory Power
24 Vdc, 1A max. for ON + SW (switched)
Solar Power Max
24 Vdc at 60 watts max.
Maximum Gate Weight
3,000 lbs. (1,360 kg)
Minimum Gate Travel Distance
4 feet (1.2 m)
Maximum Gate Travel Distance
75 feet (22.86 m)
Maximum Gate Travel Speed
1 ft./sec.
Maximum Daily Cycle Rate
Continuous for line voltage, not continuous for solar
Maximum Duty Cycle
Continuous
Operating Temperature
Without Heater: -20°C to 60°C (-4°F to 140°F)
With Optional Heater: -40°C to 60°C (-40°F to 140°F)
120VAC accessory power outlets
6 amps
When the 3PHCONV kit is used, the outlets are only rated 1 Amp
External Entrapment Protection Device Inputs (non-contact
and/or contact)
Main board - up to 2 close entrapment protection devices and 1 open entrapment
protection device.
Expansion board - up to 3 entrapment protection devices configurable to either the close or
open direction and up to 8 edge sensors when using the wireless edge sensor kit model
LMWEKITU and LMWETXU.
25.1"
(50.8 cm)
17.51"
(44.5 cm)
16.77
[42.6 cm]
10.31" (26.2 cm)
10.4"
(26.4 cm)
2.52"
(6.4 cm)
INTRODUCTION