LiftMaster HDSL24UL Installation Manual - English - Page 2

TABLE OF CONTENTS, SAFETY, Safety Symbol and Signal Word Review

Page 2 highlights

TABLE OF CONTENTS SAFETY 2 Safety Symbol and Signal Word Review 2 Usage Class 3 UL325 Entrapment Protection Requirements 3 Safety Installation Information 4 Role of Dealers, Installers, and Trained Gate System Technicians ........4 Role of End Users/Home Owners 4 Gate Construction Information 5 INTRODUCTION 6 Carton Inventory 6 Operator Specifications 7 Site Preparation 8 INSTALLATION 9 Types of Installations 9 Step 1 Determine Location for Operator 10 Step 2 Install the Operator 11 Step 3 Attach the Chain 12 Step 4 Install Entrapment Protection 14 Step 5 Earth Ground Rod 17 Step 6 Power Wiring 17 Step 7 Connect Batteries 19 Step 8 Dual Gate Setup 20 Step 9 Install the Cover 22 Step 10 Install Warning Signs 22 ADJUSTMENT 23 Limit, Speed, and Force Adjustment 23 Obstruction Test 25 PROGRAMMING 26 Remote Controls (Not Provided 26 LiftMaster Internet Gateway (not provided 27 CAPXL Connected Access Portal 27 Erase All Codes 28 Erase Limits 28 Constant Pressure Override (CPO 28 Gate Hold Open Feature 28 To Remove and Erase Monitored Entrapment Protection Devices.......28 OPERATION 29 Gate Operator Setup Examples 29 Control Board Overview 30 Manual Disconnect 31 Reset Switch 31 Relay Adapter Board and Terminal Block Access 31 Operator Alarm 32 Remote Control 32 ACCESSORY WIRING 33 External Control Devices 33 Locks 34 Miscellaneous Wiring 34 EXPANSION AND RELAY ADAPTER BOARDS 35 Expansion and Relay Adapter Boards Overview 35 Auxiliary Relays 36 Wiring Accessories to the Expansion Board 37 MAINTENANCE 38 Important Safety Instructions 38 Maintenance Chart 39 Batteries 39 Drive Train 39 TROUBLESHOOTING 40 Diagnostic Codes 40 Control Board LEDs 41 Troubleshooting Chart 42 SOLAR PANELS 45 Step 6 Solar Panel(s 45 REPAIR PARTS 49 ACCESSORIES 50 WARRANTY 52 APPENDIX 53 SAMS Wiring With Relays Not Energized 53 Dual Gate Settings 53 Limit Setup With a Remote Control 54 Wiring Diagram 55 Diagnostic Codes Table 56 Site Planning Safety Checklist 58 SAFETY Safety Symbol and Signal Word Review When you see these Safety Symbols and Signal Words on the following pages, they will alert you to the possibility of Serious Injury or Death if you do not comply with the warnings that accompany them. The hazard may come from something mechanical or from electric shock. Read the warnings carefully. When you see this Signal Word on the following pages, it will alert you to the possibility of damage to your gate and/or the gate operator if you do not comply with the cautionary statements that accompany it. Read them carefully. IMPORTANT NOTE: • BEFORE attempting to install, operate or maintain the operator, you must read and fully understand this manual and follow all safety instructions. • DO NOT attempt repair or service of your gate operator unless you are a Trained Gate Systems Technician. MECHANICAL ELECTRICAL WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

2
SAFETY
2
Safety Symbol and Signal Word Review
................................................
2
Usage Class
...........................................................................................
3
UL325 Entrapment Protection Requirements
........................................
3
Safety Installation Information
...............................................................
4
Role of Dealers, Installers, and Trained Gate System Technicians
........
4
Role of End Users/Home Owners
..........................................................
4
Gate Construction Information
...............................................................
5
INTRODUCTION
6
Carton Inventory
....................................................................................
6
Operator Specifications
..........................................................................
7
Site Preparation
.....................................................................................
8
INSTALLATION
9
Types of Installations
.............................................................................
9
Step 1 Determine Location for Operator
..............................................
10
Step 2 Install the Operator
...................................................................
11
Step 3 Attach the Chain
.......................................................................
12
Step 4 Install Entrapment Protection
...................................................
14
Step 5 Earth Ground Rod
.....................................................................
17
Step 6 Power Wiring
............................................................................
17
Step 7 Connect Batteries
.....................................................................
19
Step 8 Dual Gate Setup
........................................................................
20
Step 9 Install the Cover
.......................................................................
22
Step 10 Install Warning Signs
.............................................................
22
ADJUSTMENT
23
Limit, Speed, and Force Adjustment
....................................................
23
Obstruction Test
..................................................................................
25
PROGRAMMING
26
Remote Controls (Not Provided)
.........................................................
26
LiftMaster Internet Gateway (not provided)
.........................................
27
CAPXL Connected Access Portal
.........................................................
27
Erase All Codes
....................................................................................
28
Erase Limits
.........................................................................................
28
Constant Pressure Override (CPO)
......................................................
28
Gate Hold Open Feature
.......................................................................
28
To Remove and Erase Monitored Entrapment Protection Devices
.......
28
OPERATION
29
Gate Operator Setup Examples
............................................................
29
Control Board Overview
.......................................................................
30
Manual Disconnect
..............................................................................
31
Reset Switch
........................................................................................
31
Relay Adapter Board and Terminal Block Access
................................
31
Operator Alarm
....................................................................................
32
Remote Control
....................................................................................
32
ACCESSORY WIRING
33
External Control Devices
......................................................................
33
Locks
...................................................................................................
34
Miscellaneous Wiring
...........................................................................
34
EXPANSION AND RELAY ADAPTER BOARDS
35
Expansion and Relay Adapter Boards Overview
...................................
35
Auxiliary Relays
...................................................................................
36
Wiring Accessories to the Expansion Board
........................................
37
MAINTENANCE
38
Important Safety Instructions
..............................................................
38
Maintenance Chart
...............................................................................
39
Batteries
...............................................................................................
39
Drive Train
...........................................................................................
39
TROUBLESHOOTING
40
Diagnostic Codes
.................................................................................
40
Control Board LEDs
.............................................................................
41
Troubleshooting Chart
.........................................................................
42
SOLAR PANELS
45
Step 6 Solar Panel(s)
...........................................................................
45
REPAIR PARTS
49
ACCESSORIES
50
WARRANTY
52
APPENDIX
53
SAMS Wiring With Relays Not Energized
............................................
53
Dual Gate Settings
...............................................................................
53
Limit Setup With a Remote Control
.....................................................
54
Wiring Diagram
....................................................................................
55
Diagnostic Codes Table
.......................................................................
56
Site Planning Safety Checklist
.............................................................
58
WARNING:
This product can expose you to chemicals including lead, which are known to the State of California to cause cancer or birth defects
or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
When you see these Safety Symbols and Signal Words on the following pages, they will alert
you to the possibility of
Serious Injury or Death
if you do not comply with the warnings that
accompany them. The hazard may come from something mechanical or from electric shock.
Read the warnings carefully.
When you see this Signal Word on the following pages, it will alert you to the possibility of
damage to your gate and/or the gate operator if you do not comply with the cautionary
statements that accompany it. Read them carefully.
IMPORTANT NOTE:
BEFORE attempting to install, operate or maintain the operator, you must read and fully
understand this manual and follow all safety instructions.
DO NOT attempt repair or service of your gate operator unless you are a Trained Gate
Systems Technician.
MECHANICAL
ELECTRICAL
TABLE OF CONTENTS
SAFETY
Safety Symbol and Signal Word Review