Invacare G5510 Owners Manual - Page 65

8 MAINTENANCE AND CLEANING 8 Maintenance and Cleaning WARNING! Risk of Injury or Damage To avoid injury or damage from misuse: - Read all general guidelines, warnings and cautions before performing any repair/maintenance on the bed. - All repair and maintenance on the bed should be performed by a qualified technician. Invacare recommends the following maintenance/cleaning procedures be conducted initially, between users or as needed. This form is provided as a guide to help with documentation. 8.1 Maintenance Checklist Mechanical Inspection and Maintenance Electrical Inspection and Maintenance ❑ Inspect rail latches. Ensure that all rails engage and lock as specified. ❑ Inspect for damaged or loose wiring. Have a qualified technician replace any frayed or damaged cords. ❑ Lubricate rail pivot points and all mechanical hinge points, bushings, ❑ Inspect all electrical bed components for damage or excessive wear and surface contact points as needed with white lithium grease. (i.e. cracked or broken housings, or worn components). ❑ Inspect bed, rails, assist rails, or assist bars for the presence of tubing end caps and replace as required. ❑ Check pendant, power and motor cords for chafing, cuts or excessive wear. ❑ Inspect all bed components (i.e. rails, clevis pins, hitch pins, etc...) ❑ Make sure all plugs are fully attached and free of damage. for damage or excessive wear and replaced as necessary. ❑ Visually examine all welds for cracks. ❑ Make sure all connectors are properly positioned and locked. ❑ Inspect the head and foot sections for bending, warping or damage. Invacare® G5510 Bed 64 Part No 1180159-E