Invacare G5510 Owners Manual - Page 42

To Raise/Lower, the Entire Bed, Shaft of Head Actuator, to Raise/Lower the, Head To Raise/

Get Invacare G5510 PDF manuals and user guides View all Invacare G5510 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

5.6 Using the Emergency Crank 5 OPERATION  If the bed needs to be adjusted manually due to a power outage or an electronic malfunction, use the emergency crank to make the adjustments. You should find the emergency crank attached to the slats. If you do not find the crank, contact your dealer. 1. Disconnect the pendant from the bus cable. 2. Remove the emergency crank. 3. Locate the exposed shaft end according to the function you want to perform. Refer to FIGURE 5. 4. Attach the emergency crank to one of the following: • Shaft of head actuator to raise/lower head section. • Shaft of Gearbox to raise/lower the entire bed. • Shaft of foot actuator to raise/lower foot section. 5. Push in the emergency crank while turning it the desired direction. Turn clockwise to raise. Turn counterclockwise to lower. - Emergency Crank Foot End Shaft of Head Actuator to Raise/Lower the Head Section To Raise/Lower the Entire Bed FIGURE 5 Using the Emergency Crank To Raise/Lower the Foot Section Part No 1180159-E 41 Invacare® G5510 Bed

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
5
OPERATION
Part No 1180159-E
41
Invacare
®
G5510 Bed
5.6
Using the Emergency Crank
1.
Disconnect the pendant from the bus cable.
2.
Remove the emergency crank.
3.
Locate the exposed shaft end according to the function you want to
perform. Refer to FIGURE 5.
4.
Attach the emergency crank to one of the following:
•
Shaft of head actuator to raise/lower head section.
•
Shaft of Gearbox to raise/lower the entire bed.
•
Shaft of foot actuator to raise/lower foot section.
5.
Push in the emergency crank while turning it the desired direction.
Turn clockwise to raise. Turn counterclockwise to lower.
-
FIGURE 5
Using the Emergency Crank
If the bed needs to be adjusted manually due to a power outage or an electronic malfunction, use the emergency crank to make
the adjustments. You should find the emergency crank attached to the slats. If you do not find the crank, contact your dealer.
To Raise/Lower
the Entire Bed
Shaft of Head Actuator
to Raise/Lower the
Head Section
To Raise/Lower the
Foot Section
Foot
End
Emergency Crank