Epson Runsense SF-810 User Manual - Page 83

Settings Measurement Lap HR Steps Lap Steps HR Zone Time Time to HR Zone Total Ascent1 5 Total Descent1 5 Grade1 5 Latitude/Longitude3 Estimated Time4 Estimated Distance Display name 1 line 2 lines/3 lines LapHR LapHR Steps Steps LapSteps Spent.HR LapStp Spent.HR Time.HR Time.HR TotalAscent Tot.Asc. TotalDesent Tot.Des. Grade LAT/LONG Est.Time Grade LAT/LONG Est. Est.Dist. Est.Dist. Description Average heart rate for each lap Number of steps from the start of measurements Number of steps for each lap Time within heart rate zone for each lap set by the Interval function Time to reach the heart rate zone for each lap set by the Interval function Total ascent from the start of measurements Total descent from the start of measurements Current grade Current latitude/longitude Estimated time of arrival at the target distance set in the goal function Estimated distance reached at the target time set in the goal function 1 Altitude, Total Ascent, Total Descent, and Grade are calculated using the GPS signal. These functions may be less accurate than the position and distance tracking depending on the GPS environment. 2 Set the Target Pace in the Measure set. menu. See "Setting a pace" on page 46. 3 When 3 Lines is selected as the Screen Display setting, Latitude/Longitude are only available on Line 2. 4 Use these settings when the Mode option located in the Measure set. menu is set to Goal. See "Measure set. options" on page 72. Display Lap Screen Display item Split Time Lap Distance Lap Time Lap Pace Lap HR Display name 1 line 2 lines/3 lines SplitTime Split LapDistance LapDist. LapTime Lap LapPace LapPace LapHR LapHR Explanation Total time from the start of measurements Distance for each lap Time for each lap Average pace for each lap Average heart rate for each lap 82