Epson Runsense SF-810 User Manual - Page 78
Screen settings, Customizing the measurement screen, screen
View all Epson Runsense SF-810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Settings Setting items Alarm Key Tones Initialize Value Tones Vib. (vibration) Tones & Vib. (vibration)* OFF ON* OFF - Software Version - *indicates the default setting. Explanation Adjusts the alarm type and time (1 to 10 minutes). You can also set this from the Measure set. menu. Turns button sounds on or off. Resets all setting information (Comm. Settings, User Settings, Sys. Settings and Measure set.) and pulse/stride sensor information in the product's memory. Measurement history data is also deleted. Displays the firmware version. Screen settings There are four different measurement screens available. Each screen shows different information about your current activity. Note: For details on switching between screens, see "Screen display" on page 32. Customizing the measurement screen You can customize the Measurement screen to display various information about your current activity. O If want to use GPS positioning, press C on the Time screen and wait for the GPS to determine your location. O If GPS positioning is not working or is taking too long, press C on the Time screen. Press C or D to highlight Skip on the GPS positioning screen, then press A to temporarily skip positioning. The product will continue to search for a GPS signal while measuring your activity. See "Skipping GPS positioning" on page 20. O If you want to measure in Indoor mode, press C on the Time screen. Press C or D to highlight Indoor on the GPS positioning screen, then press A. See "Indoor mode" on page 20. 1 Do one of the following to display the Measurement screen: 77