2013 Kawasaki JET SKI Ultra LX Owners Manual - Page 131
2013 Kawasaki JET SKI Ultra LX Manual
Page 131 highlights
MAINTENANCE AND ADJUSTMENTS 129 j A. B. C. D. Steering Nozzle Joint Bolt Locknut A. Joint B. Locknut the bolt and disconnect the cable joint • Remove from the steering nozzle. the handlebars in a straight ahead steering • Center position. • Turn the joint on the cable to adjust the steering. the joint and check cable adjustment • Reattach again. non-permanent locking agent to the bolt. • Apply And tighten the joint bolt and the locknut securely. Bolt Tightening Torque: 9.8 N·m (1.0 kgf·m, 87 in·lb) an additional check, turn the handlebar all the • As way to the left and right, and measure the distance between the nozzle and the edge of the reverse bucket bracket. It should be equal at both extremes.
MAINTENANCE AND ADJUSTMENTS
129
j
A. Steering Nozzle
B. Joint
C. Bolt
D. Locknut
•
Remove the bolt and disconnect the cable joint
from the steering nozzle.
•
Center the handlebars in a straight ahead steering
position.
•
Turn the joint on the cable to adjust the steering.
A. Joint
B. Locknut
•
Reattach the joint and check cable adjustment
again.
•
Apply non-permanent locking agent to the bolt.
And tighten the joint bolt and the locknut securely.
Bolt Tightening Torque:
9.8 N·m (1.0 kgf·m, 87 in·lb)
•
As an additional check, turn the handlebar all the
way to the left and right, and measure the dis-
tance between the nozzle and the edge of the re-
verse bucket bracket. It should be equal at both
extremes.