2013 Kawasaki JET SKI Ultra LX Owners Manual - Page 122
2013 Kawasaki JET SKI Ultra LX Manual
Page 122 highlights
120 STORAGE washing the watercraft, always use a mild • When neutral detergent and water. semi-gloss finish effect may be lost when the • The finish is excessively rubbed. any doubt, consult an authorized Kawasaki • If dealer. Removal from Storage The following procedure explains the steps necessary to put the watercraft back in service following a storage period. See your Kawasaki JET SKI dealer for this service, or do the following. See the MAINTENANCE AND ADJUSTMENTS chapter for detailed procedures. Carry out all recommended lubrication procedures (see the Lubrication section). Check for binding or sticking throttle, steering or shift mechanism. The throttle lever must return fully when released. Clean and gap spark plugs (see the Spark Plugs section). Check all rubber hoses for weathering, cracking, or looseness. Turn the craft on port side on a protective pad, and remove the jet pump cover. Check cooling and bilge hoses for weathering, cracking or looseness. Replace them if necessary. Reinstall the cover, apply non-permanent locking agent to the bolts before tightening securely. j • Lubrication Carry out all recommended lubrication procedures (see the Lubrication section in the MAINTENANCE AND ADJUSTMENTS chapter). • Bolts Tightening Torque: 7.8 N·m (0.8 kgf·m, 69 ft·lb) that the drain screws in the stern are se• Check curely tightened.