2013 Kawasaki JET SKI Ultra LX Owners Manual - Page 106

104 OPERATING INSTRUCTIONS Details of the steps 1. Remove the craft from the water, and remove the seat. 2. Remove the drain screws in the stern to drain water out of the engine compartment. 3. Remove the handrail plate, and check the air filter drain caps for water. NOTE żIf you see water in the drain caps, there is a great possibility that water has entered the intake manifold. Take the watercraft to a Kawasaki dealer for service that requires removing some adjacent components for access. j 5. 6. Remove the drain plug of the intake manifold and discharge water, if any, into a rag or cloth. Then take the watercraft to the Dealer. Disconnect the two ignition coil connectors on the primary ignition cables located at the right front of the engine A. Drain Caps B. Air Filter 4. If you see water in the caps, then remove both caps and discharge the water. Be sure to have a rag or cloth underneath for possible oily water. And proceed to the next step (item 5). If there is no water in the air filter inspection caps, then proceed to item 6. A. Ignition Coil Connectors 7. 8. Pull and remove all the spark plug caps. Remove all spark plugs.