Panasonic HC-VXF1 Advanced English Operating Manual - Page 189

Changing the home monitor settings of this unit ≥ Setting cannot be performed while operating monitoring with a smartphone. Touch [Setup] and select desired setting. ∫ [Home Monitor Connect] You can display the registration screen for a Device ID and Password. ≥ If [QR code] is touched, a QR code will be displayed on the screen of this unit. ∫ [Remote Voice Level] You can set the initial remote voice level and speaker volume level of the remote voice function. (Volume high)/ (Volume low) ≥ The mode cannot be switched to another one during home monitoring operations. ≥ Although home monitoring can be performed with the battery, we recommend you use the AC adaptor. ≥ It is recommended to use this unit fixed so that it will not move since it may cause false detection. ≥ Power of this unit will automatically turn off when monitoring condition continues for approximately 10 days. ≥ [REC MODE] is set to [HE]. ≥ [ZOOM MODE] is set to [Opt.Zoom 24k]. ≥ The following recording modes are not available (l 63): j Creative Control Mode j HDR Movie Mode j FULL HD Slow Motion Video Mode (For the WXF1 / VXF1 / VX1 ) j 4K Photo Mode j Cinema Like Effect Mode ≥ Backup for Twin Camera is not available during home monitoring. ≥ If you record an image when the LCD monitor of this unit is closed with the screen facing outward, the LCD monitor turns off. ≥ The password for the home monitor settings will change when [Reset Wi-Fi Settings] is performed. Set the home monitor settings of the smartphone again and reconnect to this unit when [Reset Wi-Fi Settings] is performed. - 189 -