Panasonic HC-VXF1 Advanced English Operating Manual - Page 18
Inserting/removing an SD card, Access lamp [ACCESS]
View all Panasonic HC-VXF1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
≥ In the following situations, you need an SD card conforming to Class 10 of the SD Speed Class Rating to record motion pictures. Use of a non-compatible card may cause recording to stop suddenly. j FULL HD Slow Motion Video Mode (l 73, 77) j When [Backup for Twin Camera] is set to [ON] (l 61) (For the WXF1 / VXF1 / VX1 ) j 4K Photo Mode (l 77) j Slow & Quick Video Mode Inserting/removing an SD card When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. (l 48) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored. Caution: Check that the access lamp has gone off. Access lamp [ACCESS] A ≥ When this unit is accessing the SD card, the access lamp lights up. 1 Open the SD card cover and insert (remove) the SD card into (from) the card slot B. ≥ Face the label side C in the direction shown in the illustration and press it straight in as far as it will go. ≥ Press the center of the SD card and then pull it straight out. 2 Securely close the SD card cover. ≥ Securely close it until it clicks. ≥ Do not touch the terminals on the back of the SD card. ≥ Do not apply strong shocks, bend, or drop the SD card. ≥ Electrical noise, static electricity or the failure of this unit or the SD card may damage or erase the data stored on the SD card. ≥ When the card access lamp is lit, do not: j Remove the SD card j Turn the unit off j Insert and remove the USB cable j Expose the unit to vibrations or shock Performing the above while the lamp is on may result in damage to data/SD card or this unit. ≥ Do not expose the terminals of the SD card to water, dirt or dust. - 18 -