Panasonic HC-VXF1 Advanced English Operating Manual - Page 106

[Wind Noise Canceler] This will reduce the wind noise coming into the built-in microphones while maintaining the realism. ≥ Switch to Manual Mode. (l 80) MENU : [RECORD SETUP] # [Wind Noise Canceler] # desired setting [Strong]: When a strong wind is detected, this option effectively reduces the wind noise by minimising the low-pitched sound. [Normal]: This option extracts and reduces only the wind noise without deteriorating the sound quality. [OFF]: Cancel the setting. ≥ When [Strong] is set, you can check how effectively the wind noise is reduced with the icon displayed on the screen. In descending order of the strength of the reduction effect, // / is displayed. ≥ When [Normal] is set, will be displayed on the screen. ≥ This function's default setting is [Normal]. ≥ When switching to Intelligent Auto Mode or Intelligent Auto Plus Mode, [Wind Noise Canceler] is set to [Strong], and the setting cannot be changed. ≥ You may not see the full effect depending on the recording conditions. ≥ This cannot be set when you have connected an external microphone or audio device*. * You can connect audio equipment when using the WXF1 / VXF1 . WXF1 / VXF1 [AUDIO INPUT SELECT] Switch the audio setting for the MIC/LINE IN terminal to suit the input device that is connected. MENU : [RECORD SETUP] # [AUDIO INPUT SELECT] # desired setting [MIC INPUT]: [LINE INPUT]: Select when you connect an external microphone. Select when you connect audio equipment, etc., compatible with line input. - 106 -