Panasonic HC-VXF1 Advanced English Operating Manual - Page 111

≥ When [MIC SETUP] is [ZOOM MIC], the volume will be different depending on the zoom rate. ≥ (audio input level meter) is displayed on the screen when [5.1ch/2ch] is set to [5.1ch], and (audio input level meter) is displayed when [5.1ch/2ch] is set to [2ch] and [AUDIO LEVEL]/[MIC LEVEL] is set to a setting other than [AUTO]. ≥ You cannot record with the audio completely muted. [PICTURE ADJUST] Adjust the quality of the image while recording. Adjust by outputting to a TV while adjusting the quality of the image. ≥ This setting is retained when you change between Motion Picture Recording Mode and Still Picture Recording Mode. ≥ Switch to Manual Mode. (l 80) 1 Select the menu. MENU : [RECORD SETUP] # [PICTURE ADJUST] 2 Touch the desired setting items. [SHARPNESS]: Sharpness of the edge [COLOR]: Depth of the color of the image [EXPOSURE]: Brightness of the image [WB ADJUST]: Picture color balance 3 Touch / to adjust settings. 4 Touch [ENTER]. ≥ Touch [EXIT] to complete the settings. ≥ appears on the screen. WXF1 / VXF1 [FOCUS RING SETTING] Set the amount that focus moves when you rotate the Manual ring to adjust the focus. MENU : [RECORD SETUP] # [FOCUS RING SETTING] # desired setting [SPEED]: [COARSE]: [FINE]: The focus value changes according to the speed that the Manual ring is rotated. The focus value changes according to the rotational position of the Manual ring. The amount that focus moves when you rotate the Manual ring is large, so this is suited to rough adjustments. The focus value changes according to the rotational position of the Manual ring. The amount that focus moves when you rotate the Manual ring is small, so this is suited to fine adjustments. - 111 -