Panasonic HC-VXF1 Advanced English Operating Manual - Page 186

Using [Home Cam] ≥ Perform the home monitoring operation on the smartphone. (l 188) ≥ When the firewall is turned on, the Wi-Fi function may not work correctly. If this occurs, check the network settings. When using the home monitor function for the first time ≥ Proceed to Step 2 when your Wi-Fi connection has been made via [Wireless Settings] in [Wi-Fi Setup] (l 205 to 208). 1 Press Wi-Fi button on this unit. 2 Touch [Home Cam] on the Wi-Fi menu screen. 3 Turn off the Wi-Fi setting of the smartphone. 4 Start up the smartphone application "Image App". ≥ (If the device is Android™) When a Wi-Fi connection guidance screen is displayed, select [No]. ≥ (If the device is iOS) If a confirmation message for the Wi-Fi setup is displayed, select [Close]. 5 Enable the home monitoring setting from the menu of the smartphone application "Image App". ≥ Select [ (MENU)] # [Application function] # [Home Monitor], and enable [Use Home Monitor]. 6 Select [Set connect. dest.] of the smartphone. 7 Enter the Device ID and Password displayed on the screen of this unit into the smartphone. ≥ When the entry is complete, select [OK] (on your Android device) or [Complete] (on your iOS device). ≥ If you want to check the Device ID and Password after performing Step 8, on the screen of this unit, touch [Setup] # [Home Monitor Connect]. 8 Touch [ENTER] on the screen of this unit. ≥ Check that the message "Connecting..." has disappeared from this unit. 9 On the smartphone, select [Start Home Monitor] to start home monitoring. ∫ When configuring the home monitor settings using QR code ≥ Proceed to Step 2 when your Wi-Fi connection has been made via [Wireless Settings] in [Wi-Fi Setup] (l 205 to 208). 1 Press Wi-Fi button on this unit. 2 Touch [Home Cam] on the Wi-Fi menu screen. 3 Touch [QR code]. ≥ QR code is displayed on the screen of this unit. 4 Turn off the Wi-Fi setting of the smartphone. - 186 -