Kenwood TS-570D User Manual - Page 51
Memory Features, Recalling Quick Memory, Temporary Frequency Changes, Quick Memory, Vfo Transfer
View all Kenwood TS-570D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
RECALLING QUICK MEMORY You can recall a Quick memory channel, only when using VFO frequencies for both transmitting and receiving. 1 Press QUICK MEMO [MR]. • The current memory channel number appears. • If there is no data stored in any Quick memory channel, then this step will not access Quick memory. 2 Turn the MULTI/CH control to select a Quick memory channel (1 to 5). • You cannot change memory channels while transmitting. 3 To exit, press QUICK MEMO [MR] again. Note: Memory channels cannot be changed while using the TF-SET function. TEMPORARY FREQUENCY CHANGES After recalling a Quick memory channel, you can temporarily change the data without overwriting the contents of the channel. You can change the frequency even when you select OFF in Menu No. 08. 1 Press QUICK MEMO [MR]. 2 Turn the MULTI/CH control to select a Quick memory channel (1 to 5). 3 Change the frequencies and associated data. 4 To store the changed data in Quick memory, press QUICK MEMO [M.IN]. • This action stores the new data in the current channel and bumps the old frequency to the next higher Quick memory channel. 5 To exit, press QUICK MEMO [MR] again. Note: Memory channel data can also be changed while using the TF-SET function. QUICK MEMORY ➡ VFO TRANSFER This function copies the contents of the memory channel that you recalled, to the VFO. 1 Recall a Quick memory channel. 2 Press [M>VFO]. Note: Pressing [M>VFO] after temporarily changing the recalled data copies the new data to the VFO. 10 MEMORY FEATURES 45