Invacare XLT Owners Manual - Page 71

SECTION 9-OPTIONS Installing the Front Wheel NOTE: For ease of installation, secure handcycle frame approximately 6 inches from the ground or seek assistance. 1. Loop the chain over the front wheel sprocket. 2. Position the front wheel sprocket into the fork slots. 3. Tighten the knob on the opposite side of the quick‐release lever. 4. Secure the wheel to the fork with the quick‐release lever. Chain Sprocket Front Wheel DETAIL "A" - FRONT WHEEL QUICK-RELEASE LEVER NOTE: Quick Release Lever is an opposite side of wheel. Quick-release Lever Fork FIGURE 9.17 Removing/Installing the Front Wheel - XLT Gold, XLT Pro and XLT with Speed Cassette Chain Assembling/Using/Adjusting the Handcycle Rack NOTE: For this procedure, refer to FIGURE 9.18 on page 72. Assembling the Handcycle Rack 1. Position the receiver with the bracket facing up. 2. Position the rear wheel bar with the wheel brackets facing up. 3. Remove the two large mounting bolts and locknuts from the receiver and set aside. 4. Remove the two small mounting bolts and locknuts from the receiver bracket and set aside. 5. Secure the wheel tray to the receiver with the two large mounting bolts and locknuts. 6. Using two small mounting bolts and locknuts, secure the receiver bracket to the wheel tray. 7. Remove the two mounting bolts and locknuts from the rear wheel bar and set aside. Part No 1114850 71 Recumbent Handcycle Series