Invacare XLT Owners Manual - Page 58

SECTION 8-SERVICE PROCEDURES Parking Brake ƽ WARNING Replacement of the parking brake MUST be performed by a qualified technician. Adjuster Barrel Hex Nut Stop Button Rim of Wheel Brake Pad Mounting Nut FIGURE 8.10 Adjusting/Replacing the Parking Brake Replacing Seat Upholstery ƽ WARNING Upholstery MUST be inspected before each use. Exposure to moisture (i.e. - wet weather or puddles) will damage fastening straps/flaps/strips. DO NOT operate handcycle if upholstery is wet or damaged, otherwise severe injury may occur. NOTE: For this procedure, refer to FIGURE 8.11. 1. Remove seat cushion and back upholstery from chair. 2. Unlatch the four fastening flaps that secure the seat upholstery to the seat frame. 3. Remove the existing seat upholstery. 4. Install the new seat upholstery making sure that the three fastening flaps that are in close proximity to one another are to the rear of the seat frame. 5. Secure the four fastening flaps together. 6. Reinstall back upholstery and seat cushion onto chair. Large Strap Toward Rear of Seat Frame Back Upholstery Three Seat Upholstery Fastening Straps Towards Rear of Seat Frame Towards Front of Chair FIGURE 8.11 Replacing Seat Upholstery Recumbent Handcycle Series 58 Part No 1114850