Invacare XLT Owners Manual - Page 69

Socket Screws Fork Clamp Fork Fork Clamp Plate SECTION 9-OPTIONS Frame Fork Clamps Nut Fork Bolt Road Crown Compensator FIGURE 9.15 Removing/Installing the Fork - Travel Ready XLT PRO Equipped with Road Crown Compensator Removing/Installing the Fork - XLT Gold, and Top End Force Equipped with Steering Dampener NOTE: For this procedure, refer to FIGURE 9.16 on page 70. Removing the Fork 1. Remove the locknut securing the steering dampener to the dampener clamp (Detail ʺAʺ). 2. Remove the two socket screws securing the dampener clamp to the handcycle frame. 3. Remove the dampener clamp from the handcycle frame and the lower threaded post of the steering dampener. 4. Remove the two socket screws from the fork clamp. 5. Remove the plate from the top of the fork. 6. Remove the fork from the frame. 7. Remove the front wheel from the fork.Refer to Removing the Front Wheel on page 70. Installing the Fork 1. Position the fork onto the frame. 2. Position the plate on to the fork. Part No 1114850 69 Recumbent Handcycle Series