Invacare XLT Owners Manual - Page 60
Options
View all Invacare XLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
SECTION 9-OPTIONS SECTION 9-OPTIONS ƽ WARNING After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise injury or damage may result. Installing Rear Safety Light ƽ WARNING Operation of the handcycle is subject to all traffic rules and regulations. (This may include the use of a safety light and reflectors for dusk/night riding.) NOTE: For this procedure, refer to FIGURE 9.1. Batteries 1. Remove the lens cover. 2. Insert the AAA batteries with correct polarity (+ or ‐). 3. Reinstall lens cover. Safety Light Lens Cover Clamp Rear Seat Post Set Screw NOTE: Rear wheels removed for clarity. FIGURE 9.1 Installing Rear Safety Light Mounting the Safety Light 1. Remove the set screw from the clamp on the safety light. 2. Position the clamp onto the rear seat post. 3. Install the set screw into the clamp and tighten securely. Operating the Safety Light 1. Press GREY button to turn safety light on/off. 2. Remove lens cover and slide switch back and forth for pulse or constant mode. Recumbent Handcycle Series 60 Part No 1114850