Invacare XLT Owners Manual - Page 61
Installing the Water Bottle, Installing/Using the Tow Bar
View all Invacare XLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
SECTION 9-OPTIONS Installing the Water Bottle NOTE: For this procedure, refer to FIGURE 9.2. 1. Secure the water bottle mounting tube to the seat frame using the hardware provided. NOTE: Make sure that the water bottle mounting bracket mounting holes are facing downward. 2. Attach the water bottle mounting bracket to the mounting tube using the hardware provided. 3. Push water bottle into mounting bracket until secure. Seat Frame Mounting Bracket Mounting Tube Water Bottle FIGURE 9.2 Installing the Water Bottle Installing/Using the Tow Bar NOTE: For this procedure, refer to FIGURE 9.3. NOTE: The tow bar will not work with wheelchairs with swingaway front riggings. Only rigid wheelchairs with a tubular style footrest can be towed using the tow bar. 1. Remove the two set screws on each mounting bracket. 2. Position the mounting brackets around the handcycle rear frame. NOTE: Make sure that the tow bar is centered on the handcycle rear frame. Fastening Strip Tow Bar 3. Using two set screws for each mounting bracket, secure the mounting brackets to the handcycle rear frame. Mounting Bracket 4. Secure the tow bar to the handcycle with the mounting brackets and set screws. Set Screws Handcycle Rear Frame 5. Secure the wheelchair to the tow bar with the fastening strips provided. FIGURE 9.3 Installing/Using the Tow Bar Part No 1114850 61 Recumbent Handcycle Series