Epson TM-T88V Software Users Manual - Page 33

Apply, Save Setting - network setup

Page 33 highlights

TM-T88V Software Installer Software User's Manual Installation Port type COM Parallel USB Ethernet Item Port Baud Rate Parity Stop Bits Flow Control Data Bits LPT Port USB Port Ethernet Port IP Address Set to Printer Description Communicate with serial port. Set the following communication setting. Specify the number of serial port used for connecting the printer. Specify the baud rate. Specify the parity. Specify the stop bits. Specify the method of data flow between the computer and the printer. Specify the data bits. Communicate with parallel port. Set the following communication setting. Specify the number of parallel port used for connecting the printer. Usually, the port number is automatically displayed and no setting is required. Communicate with USB port. Set the following communication setting. Specify the USB port used for connecting the printer. Usually, no setting is required. Communicate with Ethernet port. Set the following communication setting. Specify the Ethernet port used for connecting the printer. Usually, no setting is required. Set the IP address of Ethernet port the TM printer is connected. Setup the IP address to the printer itself. U See "Network Address Setting for Ethernet Printer" on page 19 Note: When path through connection is used by the driver of APD4 customer display, adjust the TM printer's communication settings with the communication settings of customer display driver set by APD4. I Set the followings from 4. Apply and click Save Setting. Item Set as Default Printer Description Check when configuring the printer as that normally used from the Windows applications. 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96

Port type
Item
Description
COM
Communicate with serial port. Set the following communication setting.
Port
Specify the number of serial port used for connecting the printer.
Baud Rate
Specify the baud rate.
Parity
Specify the parity.
Stop Bits
Specify the stop bits.
Flow Control
Specify the method of data flow between the computer and the printer.
Data Bits
Specify the data bits.
Parallel
Communicate with parallel port. Set the following communication setting.
LPT Port
Specify the number of parallel port used for connecting the printer. Usually, the
port number is automatically displayed and no setting is required.
USB
Communicate with USB port. Set the following communication setting.
USB Port
Specify the USB port used for connecting the printer. Usually, no setting is
required.
Ethernet
Communicate with Ethernet port. Set the following communication setting.
Ethernet Port
Specify the Ethernet port used for connecting the printer. Usually, no setting is
required.
IP Address
Set the IP address of Ethernet port the TM printer is connected.
Set to Printer
Setup the IP address to the printer itself.
U
See
“Network Address Setting for Ethernet Printer” on page 19
Note:
When path through connection is used by the driver of APD4 customer display, adjust the TM printer's
communication settings with the communication settings of customer display driver set by APD4.
I
Set the followings from
4. Apply
and click
Save Setting
.
Item
Description
Set as Default Printer
Check when configuring the printer as that normally used from
the Windows applications.
TM-T88V Software Installer
Software User's Manual
Installation
33