Epson TM-T88V Software Users Manual - Page 21
EpsonNet Config, Configuration, Refresh, Device Properties, Network Interface, Network,
View all Epson TM-T88V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
TM-T88V Software Installer Software User's Manual Installation B The EpsonNet Config screen appears. Check that the target printer is listed in the screen. C Select the printer you want to configure, then click the Configuration button. When the printer does not appear, click the Refresh button. D The Device Properties screen appears. Select the Network Interface - Network - Basic(Wireless). E Set the wireless LAN. If the communication mode is Ad Hoc. If the communication mode is Infrastructure. Proceed to Step 6. Proceed to Step 7. F When the communication mode is Ad Hoc, the wireless LAN settings are as follows. When finished configuring the settings, go to step 8. 21
B
The
EpsonNet Config
screen appears.
Check that the target printer is listed in the screen.
C
Select the printer you want to configure, then click the
Configuration
button.
When the printer does not appear, click the
Refresh
button.
D
The
Device Properties
screen appears. Select the
Network Interface
-
Network
-
Basic(Wireless)
.
E
Set the wireless LAN.
If the communication mode is Ad Hoc.
Proceed to Step 6.
If the communication mode is Infrastructure.
Proceed to Step 7.
F
When the communication mode is Ad Hoc, the wireless LAN settings are as follows. When finished
configuring the settings, go to step 8.
TM-T88V Software Installer
Software User's Manual
Installation
21