Dell Latitude 9510 Service Manual - Page 59
System Configuration screen options, Enable SMART Reporting
View all Dell Latitude 9510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Option Description Keyboard The Keyboard Backlight Timeout dims out with the Battery option. The main keyboard illumination feature is not Backlight Timeout affected. Keyboard Illumination will continue to support the various illumination levels. This field has an effect on Battery when the backlight is enabled. The options are: • 5 sec • 10 sec-enabled by default • 15 sec • 30 sec • 1 min • 5 min • 15 min • Never Keyboard The Keyboard Backlight Timeout dims out with AC option. The main keyboard illumination feature is not affected. Backlight Timeout Keyboard Illumination will continue to support the various illumination levels. This field has an effect when the on AC backlight is enabled. The options are: • 5 sec • 10 sec-enabled by default • 15 sec • 30 sec • 1 min • 5 min • 15 min • Never Unobtrusive Mode This option, when enabled, pressing Fn+shift+B turns off all light and sound emissions in the system. To resume normal operation, press Fn+shift+B again. This option is disabled by default. Miscellaneous Devices Allows you to enable or disable the following devices: • Enable Front Camera-enabled by default • Enable Back Camera-enabled by default • Secure Digital (SD) card-enabled by default • Secure Digital (SD) card boot • Secure Digital (SD) card read-only-mode System Configuration screen options Option Description Integrated NIC Does not allow you to control the on-board LAN controller. The options are: • DisabledThe internal LAN in off and not visible to the operating system. • DisabledThe internal LAN is enabled. • Disabled w/PXEThe internal LAN is enabled (with PXE boot). This option is enabled by default. Drives Allows you to configure the various drives on board. All drives are enabled by default. The option is: • M.2 2230 PCI-e SSD SMART Reporting This field controls whether hard drive errors for integrated drives are reported during system startup. This technology is part of the SMART (Self Monitoring Analysis and Reporting Technology) specification. This option is disabled by default. • Enable SMART Reporting USB Configuration This is an optional feature. This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to boot any type of USB Mass Storage Devices (HDD, memory key, floppy). If USB port is enabled, device attached to this port is enabled and available for OS. System setup 59