Dell Latitude 9510 Service Manual - Page 40
Smart card reader, Removing the smart card reader
View all Dell Latitude 9510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
NOTE: If battery was disconnected from system board for service, there will be a delay during system boot-up as the system will undergo RTC battery reset. Steps 1. Align and place the battery from the left side on the laptop. 2. Install the single (M1.6x3.5) screw and eight (M2x3) screws to secure the battery in place. 3. Route the wireless antenna cables on the routing guides and adhere the adhesive tape. Next steps 1. Install the Speakers. 2. Install the Base cover. 3. Install the SIM card tray 4. Install the microSD card. 5. Follow the procedure in After working on your computer . Smart card reader Removing the smart card reader Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the microSD card. 3. Remove the SIM card tray. 4. Remove the Base cover. 5. Remove the Battery. 6. Remove the Speakers. 40 Removing and Installing Components