Dell Latitude 9510 Service Manual - Page 32
Power button, Removing the power button
View all Dell Latitude 9510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Steps 1. Align and place the I/O board on the system. 2. Replace the four (M1.6x3.5) screws to secure the I/O board in place. 3. Connect the LED board cable, fingerprint reader cable, and I/O daughter board data cable to the connectors on the I/O board. NOTE: Reconnect the battery cable after laptop repair is completed. Next steps 1. Install the System Fan. 2. Install the Base cover. 3. Install the SIM card tray. 4. Install the microSD card. 5. Follow the procedure in After working on your computer. Power button Removing the power button Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the microSD card. 3. Remove the SIM card tray. 4. Enter service mode. 5. Remove the Base cover. 6. Remove the Fan. 7. Remove the I/O board . About this task The following images indicate the location of the power-button and provide a visual representation of the removal procedure. 32 Removing and Installing Components