Dell Latitude 9510 Service Manual - Page 28
Installing the system fan, Prerequisites, About this task, Steps
View all Dell Latitude 9510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Installing the system fan Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following image indicates the location of the system fan and provides a visual representation of the installation procedure. Steps 1. Align and place the system fan onto the palmrest assembly. 2. Replace the two (M2x3) screws that secure the system fan in place. 3. Connect the system fan cable and adhere the adhesive tape to secure the system fan cable. 4. Route the antenna cable through the routing guide, and connect the I/O cable. NOTE: Reconnect the battery after system repair. Next steps 1. Install the Speakers. 2. Install the Base cover. 3. Install the SIM card tray. 4. Install the microSD card. 5. Follow the procedure in After working on your computer. 28 Removing and Installing Components