2010 Yamaha Motorsports RS Vector GT Owners Manual - Page 71
2010 Yamaha Motorsports RS Vector GT Manual
Page 71 highlights
Periodic maintenance and adjustment Standard drive track deflection: 30.0-35.0 mm (1.18-1.38 in) 3. If the deflection is incorrect, adjust the drive track. Adjusting the drive track 1. Loosen the rear axle nut. Drive track alignment Left adjusting bolt Right adjusting bolt Shifted to right Turn out Turn in Shifted to left Turn in Turn out 1 1 3 1. Rear axle nut 1. Left adjusting bolt 2. Right adjusting bolt 3. Locknut 3 2 2. 3. 4. Lift the rear of the snowmobile onto a suitable stand to raise the drive track off the ground. Start the engine and rotate the drive track one or two turns. Stop the engine. Check the drive track alignment with the slide runners. If the alignment is incorrect, loosen the locknut on the left and the right sides of the snowmobile, then align the drive track by turning the adjusting bolt on each side. Shifted to right 1 1. 2. 3. 4. 5. Forward Gap Slide runner Drive track Slide metal 1. Slide runner 65