2010 Yamaha Motorsports RS Vector GT Owners Manual - Page 50
2010 Yamaha Motorsports RS Vector GT Manual
Page 50 highlights
Periodic maintenance and adjustment 1 1. Quick fastener screw 2. Top cover 1. Top cover 5. Lift up the rear of the top cover, disconnect the main switch coupler, and then remove the cover. 3. 4. 1 Tighten the quick fastener screws. Pass the brake hose, throttle cable, parking brake cable and wire harness through the cable guide, place the cable guide in the original position, and then install the screws. 1 2 1. Top cover 2. Main switch coupler To install the top cover 1. Connect the main switch coupler. 2. Place the top cover in the original position, making sure to fit the projections on the cover into the slots in the headlight unit. 1. Cable guide 5. 6. Connect the auxiliary DC jack coupler. Install the left side cover and the shroud. ECS00372 NOTICE G G Make sure that all cables, hoses and leads are routed properly before installing the shroud and covers. When installing the shroud and covers, be sure to tighten the fasteners securely. 44