2010 Yamaha Motorsports RS Vector GT Owners Manual - Page 55

2010 Yamaha Motorsports RS Vector GT Manual

Get 2010 Yamaha Motorsports RS Vector GT PDF manuals and user guides View all 2010 Yamaha Motorsports RS Vector GT manuals

Page 55 highlights

Periodic maintenance and adjustment 7. 1 Place the headlight unit in the original position, making sure to insert the projections on the headlight unit stay into the slots on the bottom of the headlight unit. 1 1. Air filter case cover fastener 5. Lift up the air filter element frame and check the air filter element. If there is any snow on the air filter element, remove the element, brush off the snow, and then install the air filter element. 8. Fit the weatherstrip on the headlight unit into the recess in the top of the air filter case cover. 1 1. Air filter element frame 1. Weatherstrip 1 9. Install the headlight unit bolts, and then tighten them to the specified torque. Tightening torque: Headlight unit bolt: 3 Nm (0.3 m·kgf, 2.2 ft·lbf) 10. Install the top cover, the left and right side covers, and the shroud. ESU11931 6. Place the air filter element frame in the original position, and then install the air filter case cover by hooking the fasteners. High-altitude settings Operating at high altitude reduces the performance of a gasoline engine about 3% for every 305 m (1000 ft) of elevation. This is 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
Periodic maintenance and adjustment
49
5.
Lift up the air filter element frame and
check the air filter element. If there is any
snow on the air filter element, remove the
element, brush off the snow, and then in-
stall the air filter element.
6.
Place the air filter element frame in the
original position, and then install the air
filter case cover by hooking the fasteners.
7.
Place the headlight unit in the original po-
sition, making sure to insert the projec-
tions on the headlight unit stay into the
slots on the bottom of the headlight unit.
8.
Fit the weatherstrip on the headlight unit
into the recess in the top of the air filter
case cover.
9.
Install the headlight unit bolts, and then
tighten them to the specified torque.
10.
Install the top cover, the left and right side
covers, and the shroud.
ESU11931
High-altitude settings
Operating at high altitude reduces the perfor-
mance of a gasoline engine about 3% for ev-
ery 305 m (1000 ft) of elevation. This is
1.
Air filter case cover fastener
1.
Air filter element frame
1
1
1
1. Weatherstrip
Tightening torque:
Headlight unit bolt:
3 Nm (0.3 m·kgf, 2.2 ft·lbf)
1