2010 Yamaha Motorsports RS Vector GT Owners Manual - Page 52
2010 Yamaha Motorsports RS Vector GT Manual
Page 52 highlights
Periodic maintenance and adjustment ESU12911 Adjusting the throttle cable free play 1. 2. Place the snowmobile on a level surface and apply the parking brake. Remove the shroud, the left and right side covers, and the top cover. (See page 42 for removal procedures.) Remove the headlight unit bolt on each side of the snowmobile. 1 (a) 2 (b) 3. 1 3 1. Headlight unit bolt 4. Unhook the headlight unit as shown, then lift it up and move it forward, away from the handlebar. NOTICE: Be careful not to scratch the snowmobile when moving the headlight unit. [ECS00920] 1. Locknut 2. Throttle cable free play adjusting bolt 3. Throttle cable free play Throttle cable free play: 2.0-3.0 mm (0.08-0.12 in) 7. 8. Tighten the locknut. Place the headlight unit in the original position, making sure to insert the projections on the headlight unit stay into the slots on the bottom of the headlight unit. 1 1. Headlight unit 5. 6. Loosen the locknut. To increase the throttle cable free play, turn the adjusting bolt in direction (a). To decrease the throttle cable free play, turn the adjusting bolt in direction (b). 46