2010 Yamaha Motorsports RS Vector GT Owners Manual - Page 17
2010 Yamaha Motorsports RS Vector GT Manual
Page 17 highlights
Control functions TIP If the T.O.R.S. is activated, the warning light and self-diagnosis warning indicator will flash, and the two-digit code "84" will be displayed in the meter display. If this occurs, have a Yamaha dealer check the system as soon as possible. a warning light (which shows warnings together with the warning indicators) G a fuel meter (which shows the fuel remaining in the fuel tank) G a grip/thumb warmer level indicator (which shows the grip warmer level or the thumb warmer level) G a display brightness control function When the key is turned to the on position, the tachometer needle makes one sweep, and the low coolant temperature indicator light, the warning light, and all segments of the meter unit display come on and go off. G 12 3 FHI 4 5 6 7 8 9 E LO 1. Warning light " " 2. Self-diagnosis warning indicator " 3. Two-digit code "84" ESU13395 " Multi-function meter unit The multi-function meter unit is equipped with the following: G a digital speedometer G a tachometer G an odometer G two tripmeters (which show the distance traveled since they were last set to zero) G a fuel reserve tripmeter (which shows the distance traveled since the fuel level warning indicator and warning light came on) G an oil change tripmeter (which shows the distance traveled since the periodic oil change interval was reached) G a clock G warning indicators (which show self-diagnosis, coolant temperature, fuel level, and oil level warnings) G indicator lights (which show high beam and low coolant temperature conditions) 1. 2. 3. 4. 5. 6. "RESET" button "SELECT" button Tachometer Warning indicators Clock Low coolant temperature indicator light " " 7. High beam indicator light " " 8. Warning light " " 9. Meter display The grip warmer level is initially displayed for 5 seconds, then the display switches to the fuel meter. TIP To switch the speedometer, odometer, and tripmeter displays between kilometers and miles, select the odometer mode "ODO", and then push the "SELECT" button for at least 10 seconds while the snowmobile is stopped. 11