2010 Yamaha Motorsports RS Vector GT Owners Manual - Page 69

2010 Yamaha Motorsports RS Vector GT Manual

Page 69 highlights

Periodic maintenance and adjustment 1. Ski runner wear limit 1. Distance A 2. Distance B Ski toe-out (distance A - distance B): 0.0-15.0 mm (0.00-0.59 in) TIP Move the front tip of each ski fully inward before measuring or aligning. 3. 1. Ski wear limit If the alignment is not correct, consult a Yamaha dealer. ESU12151 Ski runner wear limit: 6 mm (0.2 in) Ski wear limit: 12 mm (0.5 in) ECS00560 Steering system Check the handlebar for excessive free play. To check the handlebar 1. Push the handlebar up and down and back and forth. 2. Turn the handlebar slightly to the right and left. NOTICE Avoid scratching the skis when loading and unloading the snowmobile, when riding in areas with little or no snow, or on sharp edges such as concrete, curbs, etc. This will wear or damage the skis. To align the skis 1. Turn the handlebar so the skis face straight ahead. 2. Check the following for ski alignment: G Skis are facing forward. G Ski toe-out (distance A - distance B) is within specification. If excessive free play is felt, consult a Yamaha dealer. 63

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98

Periodic maintenance and adjustment
63
NOTICE
ECS00560
Avoid scratching the skis when loading
and unloading the snowmobile, when
riding in areas with little or no snow, or on
sharp edges such as concrete, curbs, etc.
This will wear or damage the skis.
To align the skis
1.
Turn the handlebar so the skis face
straight ahead.
2.
Check the following for ski alignment:
Skis are facing forward.
Ski toe-out (distance A – distance B) is
within specification.
TIP
Move the front tip of each ski fully inward be-
fore measuring or aligning.
3.
If the alignment is not correct, consult a
Yamaha dealer.
ESU12151
Steering system
Check the handlebar for excessive free play.
To check the handlebar
1.
Push the handlebar up and down and
back and forth.
2.
Turn the handlebar slightly to the right
and left.
If excessive free play is felt, consult a Yamaha
dealer.
1.
Ski runner wear limit
1.
Ski wear limit
Ski runner wear limit:
6 mm (0.2 in)
Ski wear limit:
12 mm (0.5 in)
1.
Distance A
2.
Distance B
Ski toe-out (distance A – distance B):
0.0–15.0 mm (0.00–0.59 in)