2010 Yamaha Motorsports RS Vector GT Owners Manual - Page 63
2010 Yamaha Motorsports RS Vector GT Manual
Page 63 highlights
Periodic maintenance and adjustment Have a Yamaha dealer make this adjustment. 1. 2. Place the snowmobile on a level surface and apply the parking brake. Remove the shroud and the left side cover, and then remove the drive guard. (See pages 21 and 42 for removal procedures.) Remove the screws and bolts, and then pull the left lower cover outward to remove it. 3. 1. V-belt 6. 3 7. Remove the V-belt from the secondary sheave assembly and primary sheave assembly. Temporarily install the new V-belt on the secondary sheave assembly only, and then measure the V-belt position. Do not force the V-belt between the sheaves; the secondary sliding and fixed sheaves must touch each other. 1 2 1 1. Screw 2. Bolt 3. Left lower cover 4. Rotate the secondary sliding sheave clockwise and push it so that it separates from the secondary fixed sheave. 1. Secondary sliding sheave 2. Secondary fixed sheave 5. Pull the V-belt up over the secondary fixed sheave. 1. Edge of the secondary sheave assembly 2. V-belt position 57