2004 Ducati SuperSport 1000 Owners Manual - Page 139

The height of the light beam can be corrected using the screw (1, fig. 62) on the left side of the headlamp. Turn the screw clockwise to lower the beam, anticlockwise to raise it. The side position of the headlamp is adjusted using the adjusting screw (2, fig. 62) on the right side of headlamp. Turn the screw clockwise to move the beam to the right, anticlockwise to move it to the left. Tyres Front tyre pressure: 2.1-2.2 bar Rear tyre pressure: 2.1-2.3 bar As tyre pressure is affected by temperature and altitude variations, you are advised to check and adjust it whenever you are riding in areas where ample variations in temperature or altitude occur. Important Check and set tyre pressure when tyres are cold. To avoid front wheel rim distortion, when riding on bumpy roads, increase front tyre pressure by 0.2 - 0.3 bar. E LEFT RIGHT LEFT RIGHT 2 1 UPPER 2 LOWER fig. 62 61