2001 Ducati Superbike 996R Owners Manual - Page 89
2001 Ducati Superbike 996R Manual
Page 89 highlights
Seat catch and helmet hook Opening (fig. 14.1) Fit the ignition key into the lock (1) and turn the key clockwise. Pull gently the tail guard (2) outwards and lift it until it rests onto the fuel tank. On the rear end of the compartment underneath the seat, there is the helmet fastening cable. Insert the cable (A) into the helmet and insert the ends of the cable into the hook. Leave the helmet hanging outside (fig. 14.2) and refit the seat. Warning This system is intended to lock your helmet safely when you park your motorcycle. Never leave the helmet hanging from the hook when riding or it may get in the way and make you lose control of the motorcycle. Inserting the cable under the subframe from the left side will enable you to lock the seat. With the cable in any other position, the seat will not lock properly. Closing Arrange all parts properly inside the compartment under the seat. Lower the tail guard to its horizontal position. Press on the rear end (2) of the seat until you hear the catch click. Pull the tail guard gently up to make sure it is firmly secured to the frame. 1 1 PUSH 0 0 2 E 1 fig. 14.1 fig. 14.2 21