Singer Quantum Stylist 9960 Instruction Manual 2 - Page 68
Buttonhole Sewing
View all Singer Quantum Stylist 9960 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
BUTTONHOLE SEWING This machine can sew 13 types of buttonholes. 104. Bar-tack Buttonhole (Narrow) for light to medium weight fabrics 105. Bar-tack Buttonhole (Wide) for large buttons 106. Keyhole Buttonhole for heavy weight fabrics 107. Keyhole Buttonhole with reinforced bar tack 108. Tapered Keyhole Buttonhole 109. Round Ended Buttonhole (Narrow) for light to medium weight fabrics 110. Round Ended Buttonhole (Wide) for large buttons 111. Round Ended Buttonhole with cross bar 112. Both Round Ended Buttonhole 113. Decorative Buttonhole 114. Stretch Buttonhole 115. Heirloom Buttonhole 116. Bound Buttonhole (See page 72) Buttonhole Foot (F) Note: Density of buttonhole legs may be adjusted with stitch length control. 1. Mark position and length of buttonhole on fabric. 2. Set button on the base. If button does not fit on the base, adjust slide on base to diameter of button plus thickness of button. a = Length of button + thickness 3. Pass upper thread through the hole of buttonhole foot and bring upper and bobbin threads to the left. 4. Position fabric under presser foot so that the center line mark is in the center of the buttonhole foot. Lower the foot while pulling the frame of the buttonhole foot towards you. Note: When sewing stretch fabrics, it is suggested that you use interfacing on the backside of the fabric. 5. Lower the buttonhole lever completely. Note: Machine will not start to sew if buttonhole lever is not lowered properly or frame of buttonhole foot is not positioned extremely forward. 6. Hold upper thread lightly and start the machine. 68