Singer Quantum Stylist 9960 Instruction Manual 2 - Page 20
Function Of Each Part - parts
View all Singer Quantum Stylist 9960 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
FUNCTION OF EACH PART A. START/STOP BUTTON The machine will start running when start/stop button is pressed and will stop when pressed the second time. The machine will rotate slowly at start of sewing. MONITOR LAMP Green Light "ON" Ready to sew or bobbin winding. Red Light "ON" Presser foot is not in down position or buttonhole lever is not lowered. If the red light is on, the machine will not start even when start/stop button is pressed. If upper thread is not threaded, machine will stop after a few turns. (Upper thread sensor) Note: When the foot controller is connected, start/stop button will be deactivated. B. REVERSE STITCH BUTTON The machine will continue to sew in reverse at low speed while this button is pressed and stop when this button is released. Note: When the foot controller is connected, machine will sew in reverse while this button is pressed. When released, machine will sew forward. C. NEEDLE UP-DOWN / SLOW BUTTON Pressing this button when the machine is stopped, will change the needle position from down to up or from up to down. While sewing, by pressing this button, machine will sew in slow speed. Pressing this button again, the speed will return. D. SPEED CONTROL BUTTON The machine will sew faster when the button is slid to the right, and sew slower when the button is slid to the left. Note: When the foot controller is connected, this button limits the maximum speed. E. PRESSER FOOT LIFTER The presser foot is lifed up or down by this lever. Note: Machine will not start when the presser foot is lifted. (Except for bobbin winding) 20