Paradigm PW Soundbar Manual - Page 29

will display the current name. Pressing the up/ down directional buttons will cycle through the available alpha-numeric characters. Pressing the left/right directional buttons will move to the next/previous space. To finish programming an input name, use the left/right buttons to move all the way to the left or right. MENU OPTION: SERVICE Service: Enter the submenu by pressing the enter button. Service > Firmware > MAC LAN: Pressing the enter button will display the current firmware version for the mac address of the soundbar's LAN . Service > Firmware > MAC Wi-Fi: Pressing the enter button will display the current firmware version for the mac address of the soundbar's Wi-Fi. Service > Firmware > CAP Info: Pressing the enter button will display the current firmware version for the soundbar's DTS Play-Fi module. Service > Firmware: Enter this submenu by pressing the enter button. Service > Firmware > MCU: Pressing the enter button will display the current firmware version for the soundbar's MCU (microcontroller unit). Service > Firmware > DSP: Pressing the enter button will display the current firmware version for the soundbar DSP module. Service > Factory Reset: Enter the submenu by pressing the enter button. Resetting the soundbar will restore all settings to the factory defaults settings. This will erase all user-configured presets, and Anthem Room Correction data. This function requires confirmation to reduce risk of performing an accidental reset. Service > Factory Reset > At Home: Enter the submenu by pressing the enter button. Service > Firmware > IA3S4: Pressing the enter button will display the current firmware version for the soundbar's wireless subwoofer module. Service > Factory Reset > At Home > No: Activate by pressing the enter button. Choosing this option will exit without performing a reset. Service > Firmware > TC390: Pressing the enter button will display the current firmware version for the soundbar's touch button module. Service > Firmware > IP Address: Pressing the enter button will display the current firmware version for the soundbar's dynamic IP. Service > Firmware > MAC MCU: Pressing the enter button will display the current firmware version for the mac address of the soundbar's MCU. Service > Factory Reset > At Home > Yes: Activate by pressing the enter button. The soundbar will respond with 'Resetting'. Once complete, your soundbar will be reset to factory default Home settings. After a reset has been performed, there is no way to recover the previous settings. Service > Factory Reset > In Store Enter the submenu by pressing the enter button. Service > Factory Reset > In Store > No: Activate by pressing the enter button. Choosing this option will exit without performing a reset. 28