Paradigm PW Soundbar Manual - Page 28
four times, Learn > Reset Remote, Learn > Reset Remote > No, Learn > Reset Remote >
View all Paradigm PW Soundbar manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
work with the soundbar, even if the soundbar is programmed to respond to a second remote. successfully, the soundbar's display will display "Saved". If the new command is not learned, Using the up/down directional buttons, you can select and program the following commands: • Volume + • Volume - • Mute • Next Input • Previous Input • Up • Down • Left • Right • Enter • Bass Mode: Night • Bass Mode: Normal • Bass Mode: Bass+ • Stereo Mode: Wide • Stereo Mode: Voice+ • Stereo Mode: Normal • Power Toggle • Power On • Power Off • Menu • Input: HDMI 1 • Input: HDMI 2 • Input: HDMI 3 • Input: HDMI ARC • Input: Bluetooth • Input: Optical 1 • Input: Optical 2 • Input: Analog 1 • Input: Analog 2 • ARC On [Anthem Room Correction On] • ARC Off [Anthem Room Correction Off] Choose the command you want to program and press the enter button. The soundbar will respond with 'Push Button'. Hold the second remote approximately 12 inches (30cm) from the soundbar and press the appropriate button four times. If the new command is learned the soundbar will display "Failed". Repeat the process if learning fails. Learn > Reset Remote: Enter the submenu by pressing the enter button. Erasing will clear programming for the second remote. The Reset function requires confirmation. Learn > Reset Remote > No: Activate by pressing the enter button. Choosing this option will exit without erasing the remote programming. Learn > Reset Remote >Yes: Activate by pressing the enter button. The soundbar will respond with 'Resetting'. After codes are reset, there is no way to recover the previous settings. MENU OPTION: SOURCE NAME Source Name: Enter the submenu by pressing the enter button. The settings in this menu will allow you to assign new names to display on the soundbar when changing inputs. For example, you can program the 'Optical 1' input to display 'DVD'. Using the up/down directional buttons, you can select and program the following input names: • HDMI 1 • HDMI 2 • HDMI 3 • HDMI ARC • Optical 1 • Optical 2 • Analog 1 • Analog 2 Choose the input name you want to reprogram and press the enter button. The soundbar display 27