Paradigm PW Soundbar Manual - Page 27
Power Settings > Standby IP > Off or
View all Paradigm PW Soundbar manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
always be set to this level when it powers on or comes clear the soundbar's Wi-Fi configuration. This out of standby. The default level is -35dB. function requires confirmation. Power Settings > Power-On Volume > Last Used: When Power Standby is set to "Last Used", the soundbar will power on or come out of standby at a volume level matching the volume setting when it was powered off or went into standby. Power Settings > IP Control: Enter the submenu by pressing the enter button. Here you can turn IP Control off or on. IP Control allows the soundbar to respond to incoming IP commands from networked home control systems connected via Ethernet or Wi-Fi. Power Settings > IP Control > Off or On: This option turns the IP Control feature off or on. Activate by pressing the enter button and the soundbar will respond with 'Saved'. Power Settings > Standby IP: Enter the submenu by pressing the enter button. Here you can turn Standby IP Control off or on. This allows you to configure how the soundbar responds to incoming IP commands when it is in standby mode. Power Settings > Standby IP > Off or On: This option turns the Standby IP Control feature off or on. Activate by pressing the enter button and the soundbar will respond with 'Saved'. When this setting is set to "Off" the soundbar will not respond to incoming IP command when it is powered off or in standby mode. If IP Control is set to Off, Standby IP Control is disabled. Wireless Setup > Initialize WiFi > No: Activate by pressing the enter button. Choosing this option will exit without resetting the Wi-Fi settings. Wireless Setup > Initialize WiFi >Yes: Activate by pressing the enter button. The soundbar will respond with 'Resetting'. After a reset there is no way to recover the settings. Wireless Setup > Bluetooth Pairing: Enter the submenu by pressing the enter button. Here you may setup a Bluetooth connection. MENU OPTION: LEARN REMOTE Please note: There may be remotes that the soundbar cannot learn or that the soundbar can not learn correctly. Due to the number of available remotes, it is impossible to advise which remotes will or will not work. Please note: When learning from a second remote, you will likely find it does not have buttons that directly correspond with all available soundbar commands. Not all commands have to be programmed. Some remotes offer 'function' buttons (F1, F2, etc.) that can be used to program unique soundbar commands such as 'Bass Mode: Night' or 'Input: HDMI 1'. MENU OPTION: WIRELESS SETUP Wireless Setup: Enter the submenu by pressing the enter button. Here you may setup a Wi-Fi connection, turn Wi-Fi on or off, reset Wi-Fi settings, and setup a Bluetooth connection. Wireless Setup > Initialize WiFi: Enter the submenu by pressing the enter button. Resetting will Please note: Some remote controls offer discrete 'power on' and 'power off' buttons. Some offer a single button to toggle power on and off. The learning function of the soundbar allows you to program either scenario. Learn Remote: Enter the submenu by pressing the enter button. The settings in this menu program the soundbar to respond to a second remote control. The factory supplied remote control will always 26