Invacare M94 Owners Manual - Page 63

SECTION 9-FRONT RIGGINGS Inner Mounting Not Used Holes Mounting Bolts Seat Frame Telescoping Front Rigging Support Spacer Locknuts 87 6 5 4 32 Not Used Mounting Holes Hinge Pins STANDARD POSITION 18 & 20-Inch Wide 22 & 24-Inch Wide Holes 2 and 3 Holes 4 and 5 1-INCH OUT 18 & 20-Inch Wide 22 & 24-Inch Wide Holes 3 and 4 Holes 5 and 6 2-INCHES OUT 18 & 20-Inch Wide 22 & 24-Inch Wide Holes 4 and 5 Holes 6 and 7 FIGURE 9.6 Adjusting/Replacing Telescoping Front Rigging Supports - Van Style Seats Adjusting/Replacing Telescoping Front Rigging Supports - ASBA NOTE: For this procedure, refer to FIGURE 9.7. 1. Remove the two mounting screws, spacers and locknuts that secure the telescoping front rigging support to the seat frame. 2. Perform one of the following: A. Slide existing telescoping front rigging support to one of three depth positions. B. Remove existing telescoping front rigging. 3. Secure telescoping front rigging at desired depth with existing two mounting screws, spacers, and locknuts. Securely tighten. NOTE: The two telescoping front rigging supports can be positioned at different depths depending on the need of the user. Part No 1122145 63 Pronto® M94™