Invacare M94 Owners Manual - Page 38
Programmable Mono Port 1/2 or External Mode Switch
View all Invacare M94 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
SECTION 5-WHEELCHAIR OPERATION Connected Devices Screen NOTE: For this procedure, refer to FIGURE 5.8. This screen is displayed if the Mode Select switch is held active for about 10 seconds. This screen shows an icon that represents any additional devices that are connected to the chair. ICON DESCRIPTION 4-Switch Attendant Control RIM Control ECU (1 to 4) Proportional Attendant Control Compact Joystick Sip and Puff Control ASL Digital Control ASL Analog Control Shark Power Module Actuator FIGURE 5.8 LCD Display Screens - Connected Devices Screen Programmable Mono Port 1/2 or External Mode Switch The programmable mono port or external mode switch input is located at the rear of the joystick on the left side. The programmable mono port input offers the choice of three options: • Remote drive select • Remote stop/mode (reset) input • Single actuator input The single switch functions operate through mono port 1. An optional y‐cable allows a second programmable function through mono port 2. Remote Stop Switch The remote stop switch is used to stop the wheelchair. Remote Mode (Reset) Switch The remote mode reset switch functions the same way as the mode switch. Refer to Mode Switch on page 39. Pronto® M94™ 38 Part No 1122145