Invacare M94 Owners Manual - Page 41

Van Seat Model

Get Invacare M94 PDF manuals and user guides View all Invacare M94 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Washers SECTION 5-WHEELCHAIR OPERATION Mounting Bracket (Threaded Plate) Arm Tube Hex Mounting Screws Joystick Mounting Tube Adjustment Lock Lever Mounting Bracket NOTE: Joystick not shown. FIGURE 5.10 Repositioning the Joystick - ASBA Seat Model Van Seat Model NOTE: For this procedure, refer to FIGURE 5.11 on page 42. NOTE: Take note of position and orientation of mounting hardware for reinstalling the joystick assembly. 1. Turn the adjustment lock lever to release the joystick mounting tube from the mounting bracket. 2. Remove the joystick from the wheelchair. 3. Remove the three hex mounting screws, spacers and locknuts that secure the mounting bracket to the three mounting holes on the arm frame. NOTE: The mounting bracket is mounted to the inside of the arm frame. 4. Reposition the mounting bracket on the opposite arm frame. 5. Using the three hex mounting screws, spacers and locknuts secure the mounting bracket to the three mounting holes of the arm frame. 6. If necessary, perform the following to reposition the adjustment lock: A. Slide the adjustment lock from the mounting bracket. B. Rotate adjustment lock 180° and slide adjustment lock over the opposite end of the mounting bracket. 7. Slide joystick mounting tube through the mounting bracket to the desired position and secure adjustment lock to tube by turning lever on adjustment lock. Part No 1122145 41 Pronto® M94™

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
SECTION 5—WHEELCHAIR OPERATION
Part No 1122145
41
Pronto® M94™
FIGURE 5.10
Repositioning the Joystick - ASBA Seat Model
Van Seat Model
NOTE: For this procedure, refer to FIGURE 5.11 on page 42.
NOTE: Take note of position and orientation of mounting hardware for reinstalling the joystick
assembly.
1.
Turn the adjustment lock lever to release the joystick mounting tube from the
mounting bracket.
2.
Remove the joystick from the wheelchair.
3.
Remove the three hex mounting screws, spacers and locknuts that secure the
mounting bracket to the three mounting holes on the arm frame.
NOTE: The mounting bracket is mounted to the inside of the arm frame.
4.
Reposition the mounting bracket on the opposite arm frame.
5.
Using the three hex mounting screws, spacers and locknuts secure the mounting
bracket to the three mounting holes of the arm frame.
6.
If necessary, perform the following to reposition the adjustment lock:
A. Slide the adjustment lock from the mounting bracket.
B. Rotate adjustment lock 180° and slide adjustment lock over the opposite end of the
mounting bracket.
7.
Slide joystick mounting tube through the mounting bracket to the desired position
and secure adjustment lock to tube by turning lever on adjustment lock.
Washers
Hex
Mounting
Screws
Mounting
Bracket
Adjustment
Lock Lever
Joystick Mounting Tube
Mounting Bracket
(Threaded Plate)
Arm Tube
NOTE: Joystick not shown.