Invacare M94 Owners Manual - Page 58
Depth
View all Invacare M94 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
SECTION 8-FOOTBOARD ASSEMBLY Depth NOTE: For this procedure, refer to FIGURE 8.3. 1. Remove the quick release pin that secures the footboard assembly to the wheelchair frame. ƽ WARNING Make sure the detent balls of the quick-release pin are fully released beyond the outer edge of the tube before operating the wheelchair. Otherwise, injury and/or damage may result. Keep detent balls clean. 2. Adjust footboard to one of three mounting positions. 3. Install the quick release pin. Make sure the detent balls are fully released beyond the outer edge of the tube (Detail "A" of FIGURE 8.3). Mounting Hole Three Depth Adjustment Holes Wheelchair Frame Detail "A" - Bottom View of Footboard Quick Release Pin Quick Release Pin Detent Ball Footboard Assembly Outer Edge of Tube Detent Balls FIGURE 8.3 Adjusting the Footboard Assembly - Depth Pronto® M94™ 58 Part No 1122145