Epson WorkForce Pro WF-M4119 Users Guide - Page 177
Sharing the Printer Windows only, Installing Additional Drivers Windows only
View all Epson WorkForce Pro WF-M4119 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Administrator Information > Settings to Use the Printer > Using the Print Functions Note: If you specify the printer name on the network where the name resolution is available, the IP address is tracked even if printer's IP address has been changed by DHCP. You can confirm the printer name from the network status screen on the printer's control panel or network status sheet. 6. Set the printer driver. ❏ If the printer driver is already installed: Select Manufacturer and Printers. Click Next. 7. Follow the on-screen instructions. When using the printer under the server / client connection (printer sharing using the Windows server), make the sharing settings hereafter. Checking the Port Configuration - Windows Check if the correct port is set for the print queue. 1. Open the devices and printers screen. Desktop > Settings > Control Panel > Hardware and Sound or Hardware > Devices and Printers. 2. Open the printer properties screen. Right-click the printer icon, and then click Printer properties. 3. Click the Ports tab, select Standard TCP/IP Port, and then click Configure Port. 4. Check the port configuration. ❏ For RAW Check that Raw is selected in Protocol, and then click OK. ❏ For LPR Check that LPR is selected in Protocol. Enter "PASSTHRU" in Queue name from LPR Settings. Select LPR Byte Counting Enabled, and then click OK. Sharing the Printer (Windows only) When using the printer under the server / client connection (printer sharing using the Windows server), set up the printer sharing from the print server. 1. Select Control Panel > View devices and printers on the print server. 2. Right-click the printer icon (print queue) that you want to share with, and then select Printer Properties > Sharing tab. 3. Select Share this printer and then enter to Share name. For Windows Server 2012, click Change Sharing Options and then configure the settings. Installing Additional Drivers (Windows only) If the Windows versions for a server and clients are different, it is recommended to install additional drivers to the print server. 177